High Sensitivity Thermal Laser Sensors – 30uW to 12W
Ophir
Very low noise and drift thermal laser measurement sensors accurately measure low laser powers over a wide range of wavelengths.
Will also measure low single shot laser energies down to tens of uJ.
Features:
Will also measure low single shot laser energies down to tens of uJ.
Features:
- Power range: 30µW - 12W
- Spectral Range: 150nm - 20µm / 300nm - 10 THz
- Very low noise and drift to measure very low powers and energies
- Broadband and P absorbers for CW and short pulses
- Up to 12W
- Spectrally flat
- Version for Terahertz
Low Power Thermal Sensors – 20mW to 150W
Ophir
Ophir has the widest selection of laser power measurement sensors for low average laser powers in the industry, pulsed or continuous laser sources and various beam sizes.
Features:
Features:
- Power Range: 20mW - 150W
- Spectral Range: 150nm - 20µm
- Convection air cooled
- Broadband absorber
- P, PF and N type absorbers for short pulses
- Apertures: φ16mm to 26mm apertures
- fast response time
Low – Medium Power Thermal Sensors-30mW to 150W
Ophir
Laser measurement sensors for low laser powers or intermittent use up to higher powers for pulsed or CW lasers.
Features:
Features:
- Apertures: φ17.5mm and φ35mm
- Spectral Range: 150nm -20µm
- Power range:30mW-150W
- Convection air cooled
- CW to 30W or 50W, intermittent to 150W
- Special purpose SV, HE and EX absorbers
- For concentrated beams and pulses
Medium Power Thermal Sensors-100mW to 300W-65mm
Ophir
Laser power sensors for larger beams and higher laser powers. Compact laser measurement sensors for intermittent use.
Features:
Features:
- Large Aperture 50mm and 65mm
- Power Range: 100mW- 150W
- Spectral RAnge: 190nm-20µm/150-700nm& 10.6µm /250nm-2.2µm
- Thin profile, very large aperture
- CW to 35W or 50W, intermittent to 300W
- For continuous, long pulse and Excimer lasers
- IPL version for IPL medical light sources
Medium-High Power Fan Cooled Thermal Sensors -50mW to 500W
Ophir
Compact fan cooled Laser measurement sensors for continuous use at higher laser powers.
Features:
Features:
- Apertures:φ17.5mm , φ35mm,φ50mm and φ65mm
- Power range: 50mW Up to 500W
- Spectral range!190nm-20µm /250-2.2µm, 2.94µm /150nm-700nm, 10.6µm
- High powers and energies, large aperture
- General purpose and high damage threshold
- Fan cooled
High Power Water Cooled Thermal Laser Measurement Sensors - 4W – 10KW
Ophir
High Power Water Cooled and Fan Cooled and beam dumps for highest laser power for laser processing, laser measurement and other applications
Features:
Features:
- Spectral Range: 190nm-20µm /400nm-1.5µm, 10.6µm/800nm-1.1µm, 10.6µm
- Power Range: 4W Up to 10kW
- Apertures:φ34mm, φ45mm and φ50mm
- Water cooled
- High powers
Terahertz Calibrated Sensor
Ophir
The 3A-P-THz is designed to measure THz light sources from very low power to very high power, up to 3W, 30x the power levels of competing products.
In addition, it is the only power/energy sensor on the market that is traceable to standard laboratory calibration. The 3A-P-THz is the only power/energy meter to have been calibrated to read THz radiation at the PTB national metrology institute in Germany.
It measures short pulse or CW lasers in the 0.1 to 10THz wavelength range.
Optical power can be measured from 50μW to 3W, and energy from 20μJ to 2J.
The 3A-P-THz is less expensive than traditional systems and is compatible with all Ophir meters and PC interfaces.
In addition, it is the only power/energy sensor on the market that is traceable to standard laboratory calibration. The 3A-P-THz is the only power/energy meter to have been calibrated to read THz radiation at the PTB national metrology institute in Germany.
It measures short pulse or CW lasers in the 0.1 to 10THz wavelength range.
Optical power can be measured from 50μW to 3W, and energy from 20μJ to 2J.
The 3A-P-THz is less expensive than traditional systems and is compatible with all Ophir meters and PC interfaces.
Photonics 
