An OEM solution is needed to monitor laser performance in the system, and possibly to provide fast feedback for system control.Depending on your application various configuration can be used:

• Just a sensor with raw analog output
• Sensor with electronic providing an amplified or digital output
• Complet instrument including numeric display and/or PC interface

Ophir manufactures three main types of pyroelectric OEM sensors:
1. Low profile pyro sensors with no electronics with a BNC output to connect to the host electronics.
2. Low profile smart sensors to be used with Ophir smart display.
3. Compact pyroelectric sensors with built-in amplifiers and signal conditioners which put out a voltage proportional to energy

Main Features:
• Energy Ranges: 2μJ to 20mJ/0.1mJ to 10J
• Spectral Range: 190nm -20µm
• With built-in electronics, for complete self-contained
• OEM solution with calibrated square pulse output

The thermal OEM sensors are compact, self-contained laser power meters with built-in amplifiers. They are easy to install and give a calibrated voltage proportional to power.
They all contain electronics needed including a speed up circuit to increase the speed of response of the head to the order of 1s, 0-95%.

Features for standard OEM thermal Sensors:
• Spectral Range: 190nm - 20µm
• Power Range: 20mW-300W

Many configuration possible:

• Simple sensor with raw analog output
• Sensor with electronic providing an analog and digital output
• Complete instrument, including numeric display and or PC interface
• Custom design solution for special requirements

Calibration: Ophir' OEM Sensors can be factory calibrated at all required wavelengths